AL lock with corbin russwin keyway

RELATED FAQS

Question
Answer
Only the Schlage ND-Series can be prepped to accept non-Schlage cores. All designs are supplied with the appropriate tailpiece Non-Schlage cores are NOT included Lever designs available vary d...
Specify the J cylinder suffix followed by IC-CR6 or IC-CR7 (6 or 7 pin Corbin core) Example: T581J IC-CR6  This will accommodate an 8000 or 8000-7 Corbin Russwin Full Size core.
Schlage offers several Corbin Russwin competitor cams.  The left most column  in the image below describes what Corbin function the cam is used on and the additional columns show Modular,...
Falcon D series deadbolts will not accept Schlage Key-in-lever cylinders. The faceplate plug hole is smaller in diameter than the Schlage plug and does not fit flush when i...
For a Schlage "C"  keyway:  Specify "CP6" as the cylinder suffix when ordering  D100 or D200 locks (All other Schlage keyways are not available).
Schlage changed to the Everest 29 default keyway on March 4th, 2013. At that time, Everest 29 S123 became the default keyway for all Schlage locks. Everest product is still available but must be sp...
The RU lock can be requested as a retrofit for early Corbin Russwin Unit locks.  Several types of strikes are offered depending on the strike conditions but two are very similar with the e...
The AL lock can not be ordered to accept any competitor full size core.  The ND lock should be used in these applications.