Can a door have an InPact device and glass lights?

Yes, glass light can be used or prepped in conjunction with the Von Duprin 94/95 Series INPACT device however there are dimensional limitations between the glass light and the InPact door preparations.

Hardware and glass light locations when using Steelcraft glass trim:

  1. The minimum clearance between top of the VD 94/95 Series INPACT device cutout and exposed glass = 4 3/4".
  2. The minimum clearance between top of the VD 94/95 Series INPACT device cutout and glass cutout = 4".
  3. From top of cutout of VD 9447 device to Finished Opening for the glass = 4 3/4" minimum

Glass lights available:

  1. Standard Glass Lights - The N4, N5 & V lite can be used at standard locations with out any modification.
  2. Glass Light Options - Other glass lights are available but have limited height due to the exit device preparation and location.

DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.

Other users ask

Question