What would cause a Falcon 8200 (8230/8240) operator to slam the door closed?
The Benchmark 9100 series and Falcon 8200 Series operator will allow the door to slam if:
The motor is not connected (plugged into) the controller as the closing speed is controlled by a circuit on the controller. The motor has to be connected to the control for this circuit to function, so make sure connector from motor is plugged into controller.
The closing speed (brake circuit) on the controller has failed, and the controller needs to be replaced.
INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.
YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.