What is mounting height for 482 Door Guard
There is no specific mounting height for the Ives 482 door guard.Customer can check with local code to see if they have a defined height per ADA requirements.If not, customer can pick a height, ...
Schlage Commercial » Ives
What are the dimensions of the Ives 8975 pull?
The 8975 is a flat pull.The profile dimensions are 1.25" wide (ie. what the customer would see walking up to the pull) and 0.25" thick.(Note: Allegion support team can access a drawing in ...
Schlage Commercial » Ives
Can a 112HD or 22HD be converted to TWP in the field?
No.The TWP Panel Service Kits (840737-28 or -42 for 112HD
and 840738-28 or -42 for 224HD) are for replacing an existing damaged TWP
Panel.You cannot use this to convert an existing
mechanical or TW8 h...
Schlage Commercial » Ives
What would cause a continuous hinge to make noise?
The most common reason is an installation issue.If the screws are not installed straight, or if unwanted material gets between the hinge and the frame or door, the result could allow ...
Schlage Commercial » Ives
Can a hinge pin door stop be used on a 5BB1?
The residential hinge pin door stops, 69, 70, 72, & 73, cannot be used with commercial butt hinges like the 5BB1 or the 3PB1 (or any of them.) While the pin diameter on our commercial hinges...
Schlage Commercial » Ives