Category: Falcon

(Results from 21 to 30)
Where are the part manuals for Falcon exits?
Falcon (19. 24, 25, and XX) parts manuals for Exits are downloadable on the ...
Schlage Commercial » Exit Devices » Cross Bar » XX Series » Falcon | Schlage Commercial » Exit Devices » Recessed » 2390 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 17 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon | Schlage Commercial » Falcon
What locks are always locked on the outside?
The storeroom lock function is described as follows: Latch bolt operated by key from outside or by operating inside lever. Outside lever is always inoperative. The following are storeroom functions...
Schlage Commercial » Falcon | Schlage Commercial » Schlage
Is a standard cylinder keyway such as "C" available in SFIC?
It is not possible to key SFIC and standard cylinders including Schlage FSIC into the same system.  A keyway name may be shared between the two key familie...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Key Systems » Cylinders » Cylinder » Falcon | Schlage Commercial » Falcon
What is the part number for the lever return spring for an old 182LE trim?
These parts are no longer available.  For reference the spring part number is 4841 and the clip part number is 4326....
Schlage Commercial » Falcon
What is the part number for a SFIC core from Falcon?
Regular Core (suffix keyway to number) Description Uncombinated Combinated 6-Pin 7-Pin 6-Pin...
Schlage Commercial » Key Systems » Cylinders » Cylinder » Falcon | Schlage Commercial » Falcon
What parts are needed to convert functions on a 8500 mortise lock body?
See Step 3 of the mortise lock reversing instructions(D-4010) which shows function conversions and what part(s) are needed if any are needed....
Schlage Commercial » Falcon
Where is the template for the 718 trims made after 2/28/2011 for Falcon/Monarch concealed vertical rod devices?
Templates for current 718 series trim can also be found on Falcon website...
Schlage Commercial » Falcon
How do I remove the lever on an M lock?
To remove the M lock trim follow the steps below in reverse.       The M lock spanner wrench is 021415.  Although this wrench is no longer available from ...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series » Falcon | Schlage Commercial » Falcon
Is the circular drive in face plate sold separate for the Q330-254?
The faceplate is not sold separate, a complete latch would need to be purchased. ...
Schlage Commercial » Mechanical Locks » Deadbolts » D Series | Schlage Commercial » Falcon
What size of 2390 replaces the discontinued 1390 device?
The 2390 is only available in two sizes, a  21"(overall 24.125" w/ endcaps) and a 24"(Overall 27.125" w/endcaps) unlike the older 1390 which could have been ordered to size. You would o...
Schlage Commercial » Exit Devices » Recessed » 2390 Series » Falcon | Schlage Commercial » Falcon