Category: PS900 Series

(Results from 11 to 16)
Do the PS900 Series power supplies have an AC monitor / AC failure output?
All PS900 Series power supplies are equipped with an AC monitor which can signal when the unit stops receiving AC power....
Schlage Commercial » Power Supplies » Standard » PS900 Series | Schlage Commercial » Power Supplies » Standard » PS900 Series » Von Duprin
Are the standoffs replaceable on the PS900 series power supplies?
The standoffs or mounting posts for mounting circuit boards are a very tight press fit.  They should not loosen.  If the standoffs have loosened or are missing, they can not be put back in p...
Schlage Commercial » Power Supplies | Schlage Commercial » Power Supplies » Standard | Schlage Commercial » Power Supplies » Standard » PS900 Series | Schlage Commercial » Power Supplies » Standard » PS900 Series » Von Duprin | Schlage Commercial » System Components » Power Supplies | Schlage Commercial » System Components » Power Supplies » PS900 Series | Schlage Commercial » System Components » Power Supplies » PS900 Series » Schlage Electronics
What is the 900-8P option board function for the PS900 power supply series?
8 independent PTC protected outputs. They are devices that automatically break the circuit when it gets too much amperage and automatically resets the thermal fuse once the overdraw has cleared....
Schlage Commercial » Power Supplies | Schlage Commercial » Power Supplies » Standard » PS900 Series | Schlage Commercial » System Components » Power Supplies » PS900 Series | Schlage Commercial » System Components » Power Supplies » PS900 Series » Schlage Electronics
Is the 871-2 option board compatible with PS900 Series power supplies?
The 871-2 option board is incompatible with PS900 Series power supplies.  The remaining PS800 Series option boards such as the 873-AO, 873-4TD, etc. are also incompatible with the PS900 Series....
Schlage Commercial » Power Supplies » Standard » PS900 Series
Is the Schlage Battery 900-BAT 2 pack compatible with the Locknetics LP/150/250 Power supply?
The Schlage Battery 900-BAT 2 pack is fully compatible with the Locknetics LP/150/250 Power supplies. ...
Schlage Commercial » Power Supplies » Standard » PS900 Series | Schlage Commercial
If you are using a 2RS, 4R or 4RL board in a PS902, should the DC out +/- on the board still have power on them?
Yes, the main DC out of PS902 will have constant power out unless there is a 900-FA board on the main board and the FA board is active in a fire alarm state....
Schlage Commercial » Power Supplies | Schlage Commercial » Power Supplies » Standard » PS900 Series | Schlage Commercial » System Components » Power Supplies

Support by product