Is there a recommended mounting height range for door hardware?
Per IBC 2009:
1008.1.9.2 Hardware height:Door
handles, pulls, latches, locks and other
operating devices shall be installed
34 inches (864 mm) minimum and 48
inches (1219 mm) maximum above the
fi...
Schlage Commercial » Mechanical Accessories » Push & Pull Plates » Ives | Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Mechanical Locks » Deadbolts | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Push/Pull Latches | Schlage Commercial » Mechanical Locks » Tubular / Interconnected
What is a Tubular lock?
Tubular Locks: Tubular locks have a center spindle
assembly that extends through the center of the lock body and latch, allowing
for retraction of the latch when the lever or knob are rotated.&nb...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Tubular / Interconnected | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » Y Series » Falcon | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S-Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S-Series » Schlage | Schlage Commercial » Falcon | Schlage Commercial » Schlage | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » LT Series
Why does my latch spin on my LT lock?
If a replacement LT latch faceplate is needed, a complete latch assembly is required. See How do I order replacement LT latches?...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Tubular / Interconnected | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » LT Series
What is the 21-028 cylinder?
The 21-028 is a discontinued Schlage S-series cylinder replaced by the 21-059....
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Tubular / Interconnected | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S200 Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S200 Series » Schlage | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S-Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S-Series » Schlage
How to order replacement LT latches?
NOTE: Radius corner latches are not available for the LT-series locks. ...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Tubular / Interconnected | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » LT Series
The lever on an LT Series lock rotates but the latch does not retract.
Cause: The spindle screw was not fully tightened and the spindle has pulled free of the lever hub.Resolution: Remove the leversEnsure that both the interior and exterior spindles are fully seated...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Tubular / Interconnected | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » LT Series
Are Schlage H series locks handed?
During the installation process the chassis and latch can be oriented in either direction to accommodate any hand or swing of door. During installation the handing of the knob may need to be cha...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Tubular / Interconnected | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » H Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » H Series » Schlage
Can the LT locks be ordered in a split finish or split design?
The LT locks are not available with split finish or split design....
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Tubular / Interconnected | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » LT Series
How to specify the handing of a handed lever.
Some lever designs by Schlage are handed such as Flair. Levers that are handed cannot be moved from the inside to the outside or vice versa because the direction of the lever changes. This...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Tubular / Interconnected
Can Schlage locks be re-handed in the field?
The chassis on cylindrical locks are not handed and can be installed on a door regardless of the handing. Mortise chassis or lock bodies are handed and can be re-handed in the field with few e...
Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Mechanical Locks » Cylindrical » B Series | Schlage Commercial » Mechanical Locks » Cylindrical » A Series | Schlage Commercial » Mechanical Locks » Cylindrical » AL Series | Schlage Commercial » Mechanical Locks » Cylindrical » D Series | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Mechanical Locks » Deadbolts | Schlage Commercial » Mechanical Locks » Deadbolts » B Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » CS200 Series | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L400 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series | Schlage Commercial » Mechanical Locks » Push/Pull Latches | Schlage Commercial » Mechanical Locks » Tubular / Interconnected | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » H Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S200 Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S-Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » LT Series | Schlage Commercial » Mechanical Locks » Mortised » LM9200