Category: Mechanical Locks

(Results from 21 to 30)
Can the RX switch be rehanded on the Schlage electrified mortise locks?
On Vandlgard versions of the electrified L9000 (LV909X, LV949X), the RX switch is built into the lock case. Therefore, the RX switch CANNOT be re-handed on electrified Vandlgard locks....
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage
What wire gauge is required for the L9090EL/EU, L9091EL/EU, L9092EL/EU, L9093EL/EU, L9094EL/EU, L9095EL/EU Schlage electrified locks?
Please see here for the wire run and wire gauge requirements for the L9090EL/EU, L9091EL/EU, L9092EL/EU, L9093EL/EU, L9094EL/EU, L9095EL/EU Schlage Mortise locks. ...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Schlage
What is a D200 series deadbolt?
D200 Medium Duty Deadlocks 1” Bolt ProjectionDoor Thickness: 1-3/8” to 1-7/8”. For thicker doors, available up to 2-1/4”.Backsets:  2-3/8”- 2-3/4” adjustable deadbolt.Attachment: Lock...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Deadbolts | Schlage Commercial » Mechanical Locks » Deadbolts » D Series | Schlage Commercial » Mechanical Locks » Deadbolts » D Series » Falcon
Can the ND rectifier be used with DC voltage?
The rectifier can be used with DC voltage when using the Schlage ND12/80/96  EL/EU solenoid driven locks shipped prior to March 14, 2016. The rectifier will just filter and reduce the line n...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series » Schlage
How do I program my device?
The programming processes for Allegion devices can be both product and features specific.  Some products programming processes are electronic in nature, others are physical in nature.  ...
Schlage Commercial » Automatic Operators | Schlage Commercial » Biometrics | Schlage Commercial » Credentials | Schlage Commercial » Door Controls | Schlage Commercial » Doors and Frames | Schlage Commercial » Electronic Locks | Schlage Commercial » Exit Devices | Schlage Commercial » Key Systems | Schlage Commercial » Mechanical Accessories | Schlage Commercial » Mechanical Locks | Schlage Commercial » Power Supplies | Schlage Commercial » Readers | Schlage Commercial » Security Management | Schlage Commercial » Software | Schlage Commercial » System Components | Schlage Commercial » Falcon | Schlage Commercial » Glynn-Johnson | Schlage Commercial » Ives | Schlage Commercial » LCN | Schlage Commercial » Schlage | Schlage Commercial » Schlage Electronics | Schlage Commercial » Steelcraft | Schlage Commercial » Von Duprin
The lever on an LT Series lock rotates but the latch does not retract.
Cause: The spindle screw was not fully tightened and the spindle has pulled free of the lever hub.Resolution: Remove the leversEnsure that both the interior and exterior spindles are fully seated...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Tubular / Interconnected | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » LT Series
Can AC or rectified AC voltage be used to operate the L9090, L9091, L9092, L9093, L9094 or L9095 EL/EU mortise lock?
AC voltage should never be used even when using a rectifier. ...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage
Is there additional door prep required when using the Anti Friction Fire Dead latch on a wood door?
There will be additional prep needed when using the Anti Friction Fire Dead latch on a wood door. Please see here for the Anti-Friction Fire Door Dead Latch template. ...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Mechanical Locks » Cylindrical » T Series | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Schlage
Are Schlage H series locks handed?
During the installation process the chassis and latch can be oriented in either direction to accommodate any hand or swing of door.  During installation the handing of the knob may need to be cha...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Tubular / Interconnected | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » H Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » H Series » Schlage
Why are the mounting posts on the SL1 too short?
The SL1 trim uses longer mounting posts than a standard trim.For SL1 trim on a 1-3/4” door, the mounting post are L583-214.For SK1 trim on a 1-3/4” door, the mounting post are L583-212.  No C...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage