Is there an HL6 spring and rivet package available?
Schlage offers both the old style and new style spring and rivet package for the HL6/HL6M/PL7 and PL8.HLPART.10158 - HL6/HL6M/PL7/PL8 Spring and Rivet PKGHLPART.10159 - Old Style Spring and Rivet PKG...
Schlage Commercial » Mechanical Accessories » Push & Pull Plates » Ives | Schlage Commercial » Ives
Does the cylinder have to be horizontally mounted in VR910 x 98EO?
The instructions and template for the VR910NL and VR914NL trim used with Von Duprin 98/99 Rim or Vertical Rod devices show the cylinder mounted with the keyway horizontal. This keeps the trim fr...
Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Mechanical Accessories » Push & Pull Plates » Ives
Is there a recommended mounting height range for door hardware?
Per IBC 2009:
1008.1.9.2 Hardware height:Door
handles, pulls, latches, locks and other
operating devices shall be installed
34 inches (864 mm) minimum and 48
inches (1219 mm) maximum above the
fi...
Schlage Commercial » Mechanical Accessories » Push & Pull Plates » Ives | Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Mechanical Locks » Deadbolts | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Push/Pull Latches | Schlage Commercial » Mechanical Locks » Tubular / Interconnected
Is the HL6 EO/EN provided with a cover plate?
The HL6EO has a mounting plate on the pull side of the door and a push paddle. The HL6EN has a mounting plate on the push side of the door and a pull paddle. ...
Schlage Commercial » Mechanical Accessories » Push & Pull Plates » Ives | Schlage Commercial » Ives