Category: 94/95 Series INPACT

(Results from 11 to 14)
What finish process is used on the Von Duprin Inpact exit device series 94 and 95?
When ordering standard 94/95 The push bar will an anodized finish, unless ordering a  powder coat finish. ,and the push bar end caps are always black powder coat 622/315, unless you ask us ...
Schlage Commercial » Exit Devices » Recessed » 94/95 Series INPACT | Schlage Commercial » Exit Devices » Recessed » 94/95 Series INPACT » Von Duprin
What is the base material of the end caps on the 94/95 Series device?
The end caps are made of aluminum....
Schlage Commercial » Exit Devices » Recessed » 94/95 Series INPACT
Is there a way to make EL devices quieter?
You can't make the EL device quieter.  The inrush of current causes the plunger and solenoid to make noise. A quieter option would be motorized electric latch retraction.  Von Duprin h...
Schlage Commercial » Exit Devices » Recessed » 94/95 Series INPACT | Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Falcon | Schlage Commercial » Von Duprin
How tall is the push pad, not the 4-1/4" tall door prep, for the 9947 impact device?
The height of the actual pushpad, the portion not in the door, is 4-5/8" tall....
Schlage Commercial » Exit Devices » Recessed » 94/95 Series INPACT