User questions

Question
Answer
  • Do the new MTB readers have to be order as 485 to have this connection?
  • How do I identify the new QEL motor launched in 2012?
  • Will the QEL+ still work with the 900-2Q?
  • Can the EL or QEL conversion kit be used on the old Von Duprin 33/35 exit device?
  • Can you add SD and EL to a mechanical 99 series exit device?
  • Can you convert the EL33A/35A or EL98/99 series exit device to the QEL device?
  • What is QELA?
  • How many Von Duprin QEL devices can be connected to a power supply?
  • Can a QEL device be wired so that it stays open during a fire condition?
  • How long are the rod lengths for the 25-V?
  • Can you order 8827L-F less bottom rods?
  • Can the electric strike be used with a vertical rod device on a fire-rated door?
  • What parts do I need to add to the bottom rod of my existing Von Duprin 8827 LBR exit device?
  • What parts are necessary to add the bottom rod/latch/strike to a 98/9927-LBR/LBR-F (less bottom rod) device?
  • What would keep the vertical rod exit devices top latch from being held retracted in the open position?
  • Is the 2227 panic exit device available LBR?
  • Can you do LBR on a 98/9947 WDC?
  • Will the 25-C series rods and latches work on the old 18-C?
  • Why would an EL1690 retract the rods but not hold them?.
  • Where do I install my Auxiliary Fire Latch (AFL) in a Less Bottom Rod, Fire Rated (LBR-F) exit device?
  • Can the XX-V, 19-V, 24-V or 25-V extension rod be used on the bottom rod?
  • Does Von Duprin offer an exit device for exterior use?
  • When are Panic Devices required?
  • What is the difference between Panic Hardware and Fire Exit Hardware?
  • PANIC HARDWARE
  • Is the Von Duprin 2' door device provided with a UL label?
  • What Schlage cylinders and cams are used with Von Duprin exit devices?
  • What Schlage cylinders and cams are used with Von Duprin exit devices?
  • What Falcon and Schlage cylinders and cams are used with Falcon exit devices?
  • Does the cylinder cam get inverted on the SD option for the Von Duprin 99 exit device?
  • Does the Von Duprin CD kit include the machined cover plate for the cylinder?
  • What is the Falcon cam designation for use on 25 series trims?
  • What cylinders are used to operate Von Duprin devices?
  • What are the part numbers for the Schlage blocking rings?
  • What is the part number for the Schlage thumbturn rim cylinder?
  • What cylinder is needed with Von Duprin exit alarm ALK?
  • What Schlage cylinders and cams are used with Von Duprin exit devices?
  • What cylinder is used in a 210K trim for the 22 series exit device?
  • Can I use CD and ALK on a 98/99 series Von Duprin?
  • Do the Falcon exit devices have the double cylinder option?
  • What weld options are available for Zero thresholds?
  • Is there a replacement seal for the 429?
  • Should I use Cam Lift Hinges on a door with an Auto Opener?
  • Warranty information on Allegion Commercial products.
  • What actuators can be used on the 8310-866 Bollard post?
  • What is the ANSI recommendation for the distance between the actuator and the door opening?
  • Can a 8310-818 be used outside?
  • Where are hardware templates?
  • What is the part number for a blade stop shim for a 6111 or 6113 electric strike?
  • BLADE STOP SPACER
  • What is the SUS feature "Device Template"