Ask your question
User questions
- What power supply is needed for EL devices?
- Warranty information on Allegion Commercial products.
- What is the replacement for the Locknetics 9100 series electric strike?
- Locknetics NC450 Strike and Fire Rating
- Locknetics Electric Strikes on Double Door Applications
- Are the Von Duprin 6000 series electric strikes rated for continuous duty?
- 3. Can you replace a Cobra 9000 series lock with exit device with a CO-100 with the existing exit trim?
- The Hand Held Device (HHD) or Schlage Utility Software (SUS) will not connect to the CO200?
- Why won't my HHD connect to the AD300 lock?
- Why is my HHD not connecting to my AD lock?
- What Schlage cylinders and cams are used with Von Duprin exit devices?
- Does the cylinder cam get inverted on the SD option for the Von Duprin 99 exit device?
- Does the cam have to be inverted for cylinder dogging on the falcon 25?
- What Falcon and Schlage cylinders and cams are used with Falcon exit devices?
- Does the Von Duprin CD kit include the machined cover plate for the cylinder?
- What is the Falcon cam designation for use on 25 series trims?
- Schlage Engage and Control Locks - Using Control "Construction Fobs" on Other Devices
- How do you order/read an order for contsruction fobs for the Control lock?
- Does BE467 Construction Mode require a particular credential type?
- What is the CO-220?
- What is the read range of the Schlage MT11 wall mounted reader?
- What is maximum width, height and weight for IVES butt hinges?
- Are the Von Duprin 6000 series electric strikes rated for continuous duty?
- Isonas RC03 with Intermittent Connection / Drop
- What would cause a 4600 Series operator to open up and intermittently stick open?
- How hot do the 6000 electric strikes get?
- Can doors be prepared for raceways in the factory?
- Can LCN closers be installed outside in the elements?
- What LCN closers are available in a tri-pack mounting?
- Can I mount an LCN Cush closer with an GJ overhead stop?
- What arm can I use for the old LCN 4030/4130 closer?
- When did they start putting the green dial's on the 4041 closers?