Ask your question
User questions
- What tool is needed to remove the security screw from a CO lock?
- What are Pneumatic Automatic Operators?
- BLOW-OPEN
- What are Hold Open Closers & Magnets?
- Is a 20 minute label door a real fire door?
- Does LCN still make a closer that has the built in smoke detector?
- Is a 20 minute label door a real fire door?
- Are astragals required on fire doors?
- Does LCN still make a closer that has the built in smoke detector?
- What are Hold Open Closers & Magnets?
- Can an auto operator be installed on a Dutch door?
- What is the maximum size for a Dutch Door?
- Are thermal break frames available?
- Does Steelcraft offer a Kerf Frame feature?
- What are the different door cores available?
- What is a U-Factor?
- What are the thermal factors for Steelcraft door products?
- What is thermal bow?
- Why would an EL 98/99 solenoid get hot?
- Should a solenoid be hot to the touch?
- Can the Von Duprin exit alarm ALK and electric latch retraction QEL or EL device be in the same device?
- What could cause the Von Duprin EL solenoid not to hold when mechanism cover plate is slide over the solenoid?
- What power supply is need for Falcon EL devices?
- What is needed to keep the EL device retracted all day?
- Is there a Von Duprin conversion kit to change mechanical to electric latch retraction EL in the field?
- What is the part number for the HD EL conversion kit for Von Duprin devices?
- Does EL or QEL conversion kit for Von Duprin exit devices contain mechanism cover plate?
- How is the EL exit device wired up to the 900-2RS?
- NDE - Construction Core Program Charges
- What is the difference between the 09-713 and the 09-663 armor front?
- What does the E & T or H stand for in the falcon conventional cylinder section of the Falcon Price book?
- The Ives catalog shows a 9624 offset pull that is not in the price book. What is 9624?
- Does the cam have to be inverted for cylinder dogging on the falcon 25?
- Does the Von Duprin CD kit include the machined cover plate for the cylinder?
- Is cylinder dogging (CD) available with the Falcon 1690 or 1790 exit device?
- What Falcon and Schlage cylinders and cams are used with Falcon exit devices?
- What cylinder is used in the Falcon 24/25 exit alarm kit?
- NDE - Construction Core Program Charges
- What is the difference between the 09-713 and the 09-663 armor front?
- What does the E & T or H stand for in the falcon conventional cylinder section of the Falcon Price book?
- The Ives catalog shows a 9624 offset pull that is not in the price book. What is 9624?
- How do you install the LCN 9530 Senior Swing (STD) pull arm?
- Can you power an electric strike or maglock from the 9500 Series Senior Swing?
- How do you install the LCN 9540 Senior Swing (REG) push arm?
- Can a 4040 Pull Side closer be mounted with Swing Clear Hinges?
- Can a 4000T pocket closer go 180 degrees?
- Does the 4600 series operator have a Push N Go feature?
- What LCN operator would be equal to Horton 4000 series operator?
- How do you order a Senior Swing header for a 2810 on one leaf and a 2010 on the other?
- What is the power output on the Senior Swing 9500 series?
- How do you get the digital read out to light up on the Senior Swing Control Box?
- When did we start shipping the Senior Swing, Benchmark, and Falcon operators with the ES Filter?
- Does the 9540 Senior Swing need a separate relay board for wiring to electric locks?