split key removal

RELATED FAQS

Question
Answer
Split key systems are delivered in the highest level section on the key tip (insert): L - obverse or classic Y - reverse 0000 - Paracentric ZZZZ - Quad D000 - restricted Everest C000 - open...
With split key construction keying there are two ways the construction insert is retained in the cylinder so that it won't fall out the back end of the plug, see Figure 1.  The&nb...
The lever may be missing the slot feature for the core locking lug.  Verify slot is in place.
A control key is required to install or remove an interchangeable core from a housing or lever. The control key is identified by having "CONTROL" stamped on the bow. How to install and remove an i...
This is usually caused because the wrong tailpiece is being used on non-IC cylinders or the incorrect driver for IC options. Use the below descriptions to identify which they need.NON-IC: There are...
Most key blanks have to be ordered in multiples of 50. Exceptions listed below: Classic and Primus Large Bows Classic and Primus Access Bows All Control Keys All Emergency Keys Primus Locko...