schlage electronic keypads

RELATED FAQS

Question
Answer
Check that the reader is fully seated into the front escutcheon.
Check that there are no bent pins in the reader connector.
Check that the through door ribbon cable is properly plugged in.
Check that the battery or wired power is properly connected.
Check that the batteries are inserted into the battery holder in the correct polarity orientation.
For resetting a PED500 / BE367 deadbolt back to factory status, refer to attached guide:  Deadbolt Reset InstructionsProgrammable Electronic Deadbolt: RESET back to factory settings  It ...
The Von Duprin and Schlage PS900 series power supplies do not meet this requirement.