Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ RESTROOM LOCKS SMALL FORMAT ”

RELATED FAQS

Resolution: L9485: Latchbolt retracted by key outside or by knob/lever inside. Outside knob/lever always fixed. Deadbolt thrown or retracted by inside thumbturn. When deadbolt is thrown, all keys become ino...:

Explain the function of the L9486.

Resolution: :

How to convert a ND series lock cylinder format from PD to BD?

Resolution: On ND locks manufactured prior to January 30, 2017, the lever, spring cage and tailpiece needed to be replaced with the SFIC lever, SFIC spring cage and the SFIC driver . N123-056 - Outside sp...:

What is the part number for the SFIC tail piece for a W lock?

Resolution: Q330-168 SFIC Tailpiece (throw member for levers) Q330-169 SFIC Tailpiece (throw member for knobs) :

Schlage AL small format spacer installation requirements.

Resolution: The Schlage AL-Series SFIC locks require one (1) small format spacer (D500-000) for 7-pin cores and two (2) small format spacers for 6-pin cores. When these spacers are not ins...:

What does the cylinder suffix BDC mean?

Resolution: A small format disposable core is used as a SFIC construction core that is for low security applications and can be thrown in the waste bin after use.:

Will Schlage locks with a BD suffix accept a BEST SFIC core?

Resolution: The Schlage B and BD cylinder suffixes designate less small format interchangeable core (SFIC) cylinder prep for the lock. Any SFIC, 6-pin or 7-pin, can be inserted into th...:

How do you order the ND series lock with a small format core?

Resolution: The letters GD, HD, BD, or BDC should be put after the lock function. EXAMPLE: ND53BD GD = Schlage SFIC core HD = Construction core BD = Less core BDC = Plastic temporary construction core:

What is the part number for T lock tailpiece used with a conventional cylinder?

Resolution: Refer to Table 1 for a list of T lock tailpieces for conventional cylinders. Table 2 shows IC tailpieces. Table 1: T lock conventional tailpieces Table 2: T lock IC tailpieces:

How do I change the hand of a hotel cylinder?

Resolution: HANDINGA stop ring is installed on the right side for right hand operation and on the left side for left hand operation. Right hand shown below.: