Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
Remove l series mortise door handle
”
RELATED FAQS
Question
Answer
Can you order the Schlage L series mortise lock with knob on one side and lever on the other?
Resolution:
Includes the SL1 lever on one side and the SK1 knob trim on the other side.:
What are the part numbers for the inside and outside knobs for the L series?
Resolution:
Inside knob and bushing: 09-402 plus design and finishOutside knob: 09-401 plus design and finish:
What parts are needed to install an L lock on an 1 3/8" door?
Resolution:
The standard L9000 lock can be ordered for thin doors (1 3/8") and the appropriate parts will be shipped. The LV9000, L400, LM9000, Anti-Ligature, and N escutcheon trims a...:
Is the L-Series mortise lock UL rated?
Resolution:
UL Listed for 3-hour fire door (except L9076 and L9077):
What cylinder length do you use for escutcheon trim for the L series mortise lock?
Resolution:
Typically for a 1-3/4" door you would use a 1-1/4" cylinder. Use the Table in the Pricebook for a reference:Note: The 30-001 used with Rose trim on double cylinder applications requires a Blo...:
How long does it take to install a L Series mortise lock?
Resolution:
Typical installation by an experienced Schlage L lock installer on a door correctly prepped for the Schlage L-Series function could take 10 to 20 minutes. Many outside variables can change the amo...:
How do I remove an X lock from the door?
Resolution:
To disassemble an X lock, remove the inside knob and unscrew the inside collar and rose. The X lock spanner wrench (012172-000-30) can be used to depress the knob catch as well as tighten/loo...:
What is the part number for a L mortise lock spindle?
Resolution:
The Schlage L-Series mortise lock spindle and spring part number can be found in the Table 1. Spindles and Springs Part Number Description L283-060 Spindle and spring, 1...:
Is there a round corner armor front for the L series mortise lock?
Resolution:
The L series armor fronts are only available with square corners. :
What other locks can the blue lever removal tool 24002693 be used with?
Resolution:
On August 15, 2012 Schlage began shipping a new, more ergonomic, lever removal tool to coincide with Phase 1 of the ND-Series improvement project. This tool can be used for Schlage ND-Series ...:
Does the SL-Series door have a square edge?
Resolution:
The SL-Series door is a square edge non-handed door. A Hinge Filler (also referred to as Hinge Spacer) is the small removable trim part located on the door between hinge leaf and hinge reinforcem...: