Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ INSTALLING EXIT DEVICE ON EXTERIOR DOOR ”

Resolution: Most Panic devices are not designed for exterior applications. As with any mechanical device, exposure to the elements may affect the operation and life of the device and/or finish an...:

Do we make a blank trim plate to replace an existing trim?

Resolution: We have several blank trims listed in the price book to cover existing trim prep in door. DEVICE EO TRIM 22 230EO 88 880EO 98/99 990EO or 996EO* 33A/35A Rim, 33/3...:

Where do I install my Auxiliary Fire Latch (AFL) in a Less Bottom Rod, Fire Rated (LBR-F) exit device?

Resolution: Installation should be 6" from bottom of the door. See attached templates as reference. T-5494 for HM Doors W-5494 for Wood Doors:

Can the 9927 exit device be installed Less Top Rod?

Resolution: The top rod is required for proper operation. The top latch controls both the top & bottom rods and without the top latch/rod the bottom latch would release when pushpad or trim was used but then ...:

What is SLM blocking and how does it effect exit device installation?

Resolution: SLM - special laminated material - blocking is put into the wood doors so there is material to mount the exit device using wood screws.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ INSTALLING EXIT DEVICE ON EXTERIOR DOOR ”

RELATED FAQS