Full size driver

RELATED FAQS

Question
Answer
This is usually caused because the wrong tailpiece is being used on non-IC cylinders or the incorrect driver for IC options. Use the below descriptions to identify which they need.NON-IC: There are...
The Schlage Full Size IC core is 6 pin only. 
The RU lock can accept a Schlage Full Size core, but the cylinder suffix must be specified as "J IC-SC" so the correct parts are supplied. The tailpiece will come with the lock. Example: RU581J IC-SC
The T lock can accept a Schlage Full Size core, but the cylinder suffix must be specified as "J IC-SC" so the correct parts are supplied (including the tailpiece) Example: T581J IC-SC
The AL lock can not be ordered to accept any competitor full size core.  The ND lock should be used in these applications.
The ND-Series FSIC driver is part number N523-127.
The cam screw uses a T-10 and the housing screws use a T-15 driver.
Dimensions can be found here.