Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ cl lock flashing green when unlock ”

RELATED FAQS

Resolution: Cabinet locks:

Will the SUS pull the audit trail from the CL Series, CM Series, CO Series or AD Series locksets?

Resolution: When the SUS and HHD are used in the “Auto Update” mode, the audit info will be automatically gathered each time the SUS is successfully connected with a lock.:

How do I program Locknetics CM / CL legacy locks with the Schlage Utility Software (SUS) and Hand Held Device (HHD)?

Resolution: - With the CIP NOT inserted and the Schlage Utility Software (SUS) running o Enter the Master Programming PIN or Present Loc...:

I get three green blinks of the Schlage key and it says motor stall on my SUS/HHD during diagnostics?

Resolution: Just align the triangles per the installation instructions to allow full motor movement. - This will eliminate the SUS motor STALL report. - This will eliminate the three ...:

CL Lock

Resolution: Campus Lock, an Offline series of locks manufactured by Schlage Electronics.:

Why is the AD300 blinking Green and Red?

Resolution: Recognize the AD300 when first powered, or when recovering from a power loss, may NOT be fully functional for two minutes until the AD300 super capacitor is fully recharged....:

Why does the Schlage button light up “Green” when I open the door?

Resolution: When unlocking the CO200 door by mechanical key override, the green led will be continuously ON until the key is released. This will occur after firmware CO.A.6 (or later) has been installed int...: