Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Chexit power transfer cable ”

RELATED FAQS

Question
Answer
Where can I find wiring information for the Chexit?
Chexit devices shipped after 8-24-2015 with motor driven:Attached is the installation instructions of the the Von Duprin Chexit devices that includes the wiring diagrams.Installation Instructions&n...
Chexit devices shipped before 8-24-2015 with solenoid driven:Attached are the single and double door wiring , cable voltage reading documents for trouble shooting, and the installation in...
Is there a way to get a dry contact signal from a Chexit device when it is in alarm?
To get a dry contact signal from a Chexit device to monitor the alarm, use the blue and brown wires (do not connect the blue to the red)  of the harness connector cable tha...
How many transfer wires are required for a Chexit device?
Depends on which options are used on the Chexit device. Most application use 6-8 wires, but can use up to ten wires.
What is the most common practice for running electric power from a frame to the door and hardware?
Electrical hinges or a power transfer units are the most commonly used practices to run electric power to locks and/or strikes. Electric Hinges: Most electric hinges will fit into...
Where are hardware templates?
All the templates can be found at us.allegion.comPlease click here