Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ can i order ft series frames? ”

RELATED FAQS

Resolution: The XL11-463 is no longer available, this was an option for the L series electrified locks to come with a 5 ft. pigtail. :

Does Steelcraft offer a Kerf Frame feature?

Resolution: A Kerfed Frame is a frame that is formed with an optional integral pocket or recess in the area of the stop to receive gasket, seals or weather stripping.Kerfed frames are available as an ...:

Are thermal break frames available?

Resolution: Additional information on Thermal Break Frames can be found on Tech Data Pages 224 thru 227 :

Can you order a 1461 cylinder only?

Resolution: The part number is: 1461-3071 for the door closer cylinder body.:

How does the LM9000 LMV9000 product ship?

Resolution: The LM9000 mortise lock, door with pre-assembled vertical rods, and frame all ship separately. The soffit latch, bottom strike, and latch release will ship with the mortise lock, not the...:

Can a Von Duprin 3' pushpad exit device be converted to a 4' device in the field?

Resolution: A 3' exit device cannot be converted to a 4' exit device. You will need to replace the 3' device with a 4'. Conversely, a 4' device cannot be converted to a 3' device. Converting these exit de...:

What is the backset for the Von Duprin WS9827 device when installed on Steelcraft Paladin series door?

Resolution: The backset is 2 3/4" from edge of door to the center line of the device and strike. The preparation for the WS98/99 strike must be specified when placing order for the frame. :

What are the standard door and frame clearances?

Resolution: To determine Actual Door Size, the following values are subtracted from nominal door size (frame opening/order size) Actual Door Size: The largest measured width by height of the door leaf as m...: