ADJUST FALCON VERTICAL RODS

RELATED FAQS

Question
Answer
See the installation instructions 718 for -C devices.
Templates for current 718 series trim can also be found on Falcon website
Devices built After 2/28/2011: Use a 1 1/8" - 1 1/4" mortise cylinder with straight narrow cam. (Cam profile same as the Schlage B520-731, see table below for part numbers) Devices built Befo...
 Modular 1-1/8"  Modular 1-1/4"  SFIC and FSIC  Non-Modular Non-IC Conventional  Non-Modular Non-IC Everest Primus  B520-730  B520-731  B520-2...
The extension rod could be used either on the top or bottom rods.
See attached installation instruction for old style 33/3547 rod adjustment, 3347, 3547 Rod Adjustment.
See the link to a video instruction, Concealed Vertical Rod Exit Device Adjustment.Manual steps:Open door and release top latch bolt by inserting a screw driver in the hole at the top of the d...