Category: Von Duprin

(Results from 31 to 40)
Can the handing be changed on a Von Duprin 373L trim ?
Changing the handing on a Von Duprin 373L trim requires following parts: LHR to RHR requires 090092 ( Package of 4 springs ) and 050597 ( back plate assembly ). RHR to LHR requires  090091 ( Pack...
Schlage Commercial » Von Duprin
Should a solenoid be hot to the touch?
If there is concern that the solenoid or device is "too hot" or has the capability to cause injury, disconnect the device and contact a authorized service representative to analyze the opening....
Schlage Commercial » System Components » Electric Strikes » 6000 Series » Von Duprin | Schlage Commercial » Von Duprin
How does the Von Duprin 88TP convert to an 88L?
Followings are the steps to convert the Von Duprin 88TP to 88L device. Need to replace the back plate on the 88 exit device, part number 050103. Order a 373L trim and specify handing. Recommend...
Schlage Commercial » Exit Devices » Cross Bar » 88 Series » Von Duprin | Schlage Commercial » Von Duprin
What is the part number for the E996L rim conversion kit?
The 050672 is the part number for rim or vertical rod device and 050673 for the mortise device....
Schlage Commercial » Von Duprin
Does the E 996 lever trim retract the latchbolt on the XP 99 device?
Due to design the latchbolt of a XP98/99 does not retract into the center case of the device from any trim input. Pushing the pushpad or using the exterior trim allows the latchbolt to "pivot" around ...
Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Von Duprin
What is the 900622?
360 auxiliary package contains: control tailpiece (972385), tail piece guide (971059), cylinder locknut (971974) and pine tree clip (971090)....
Schlage Commercial » Von Duprin
Can Schlage's Longitude or Latitude lever be put on Von Duprin trims?
The Schlage Longitude and Latitude levers are not compatible with the Von Duprin trims....
Schlage Commercial » Von Duprin
Where can I find templates for the 237L two point latch device?
Click HERE for the  instruction and template for 237L device....
Schlage Commercial » Von Duprin
Can the new E conversion kit be used on the 996 L CV trim?
The E conversion kit will work on any 996L trim.Part number is 050672 for the E conversion kit for Rim or Vertical rod trims and 050673 is for mortise lock trims....
Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Von Duprin
How do you convert the Von Duprin 370 series controls to NL or night latch function?
You must have the Von Duprin NL Cylinder plate part number 967484-89 to convert the 370 series controls from classroom function to night latch function. If new installation, use the NL cylinder p...
Schlage Commercial » Von Duprin