Category: Schlage

(Results from 21 to 30)
What cylinder and cam is used with the 650 series keyswitch?
If blocking rings (PN 36-079) are needed, specify dimensions when ordering. See below for blocking ring (PN 36-079) dimensions. Blocking RingSpecify Dimension 1//8" 012 3/16" ...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » System Components » Keyswitches » 650 Series » Schlage Electronics | Schlage Commercial » Schlage
How long does it take to install a L Series mortise lock?
Typical installation by an experienced Schlage L lock installer on a door correctly prepped for the Schlage L-Series function could take 10 to 20 minutes.  Many outside variables can change the amoun...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage | Schlage Commercial » Schlage
Can you explain the ND53 function?
ND53PD (ANSI F109) Entrance Lock Turn/push-button locking; pushing and turning button locks outside lever, requiring use of key until button is manually unlocked. Push-button locking; pushing but...
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series » Schlage | Schlage Commercial » Schlage
Will a Medeco key-in-lever cylinder fit into an ND lock?
Medeco does offer a key-in-lever cylinder to fit the Schlage ND. You will need to contact Medeco for the cylinder Specify a key-in-lever cylinder to fit the Schlage ND lock....
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series » Schlage | Schlage Commercial » Schlage
What is the 613 US10B Oil Rubbed finish?
Please note that ANSI/BHMA A156.18 (American National Standard for Materials and Finishes) categorizes oil rubbed bronze finish as a "Category B" finish. The aforementioned standard states: "Categor...
Schlage Commercial » Falcon | Schlage Commercial » Schlage
How to remove a G series cylinder.
The Schlage G-series lock came with two types of conventional core cylinders. One was a non-removable cylinder and the other was a removable (demountable/interchangeable core) cylinder that looked sim...
Schlage Commercial » Schlage
What is Fusion Hardware?
As of September 8, 2017, Fusion Hardware will cease operations and no longer be accepting new orders.   ...
Schlage Commercial » Schlage
Is the Schlage Utility Software backwards compatible with legacy Schlage products?
Supported Devices AD Series Locks AD-200                          &n...
Schlage Commercial » Electronic Locks » Hand Held Devices » HHD » Schlage Electronics | Schlage Commercial » Electronic Locks » Networked » AD 400 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Networked » VIP Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Networked » WA Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » AD 200 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » CL Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » CM Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » King Cobra Series » Schlage Electronics | Schlage Commercial » Mechanical Locks » Portable » CL Series » Schlage | Schlage Commercial » Schlage
What is in the 38-075 kit?
The 38-075 was a spring cage retrofit kit used on the old D series locks manufactured prior to October 1994.  Kits contained 2 each spring cages, 2 each roses, 2 each mounting screws....
Schlage Commercial » Schlage
What is the minimum clear opening width required by ADA on a single door?
The minimum clear opening width for ADA is 32" measured from face of door opened to 90 degrees to face of stop on strike jamb. There must be no hardware mounted to the door projecting i...
Schlage Commercial » LCN | Schlage Commercial » Schlage | Schlage Commercial » Steelcraft | Schlage Commercial » Von Duprin