Category: Keyswitches

(Results from 1 to 10)
WARNING: Do Not Use AC Voltage with 653-Series Keyswitch
The product is designed and supported at using up to 30VDC @ 5A.  WARNING: The switch contact itself is rated at 250 VAC @ 5A, but as the chassis is not insulated from the switch, impro...
Schlage Commercial » System Components » Keyswitches
Can I order the Switch assemblies for the 653 Key Switch ?
·         Yes- Part number : P653059....
Schlage Commercial » System Components | Schlage Commercial » System Components » Keyswitches
What type of cam is used with the 650 Key Switch ?
·         Cam type is straight Part # L583-476...
Schlage Commercial » System Components » Keyswitches
Was the old KS920 Von Duprin key switch SPDT maintained?
Yes, the KS920 from Von Duprin was SPDT. If they order a 653-04 and then need DPDT, they just need to order a second switch and add it to the assembly. Our key switches can be changed in the field b...
Schlage Commercial » System Components » Keyswitches
What are the power requirements for the 650 series Key switches?
The previous spec of 5A@250 VAC has been updated to use only DC voltage at the switch.  The new specification is 5A@30 VDC maximum and will be updated in the technical datasheet. The LED circuit...
Schlage Commercial » System Components » Keyswitches | Schlage Commercial » System Components » Keyswitches » 650 Series
Is it possible with the 653 keyswitch to be able to turn the key to activate, but not be able to remove the key until you turn it off or deactivate?
653-041 SPDT maintained X Key remove one position....
Schlage Commercial » System Components » Keyswitches | Schlage Commercial » System Components » Keyswitches » 650 Series
What replaced the Locknetics 753-05-L2?
653-05-L2 keyswitch replaced the 753-05-L2 keyswitch....
Schlage Commercial » System Components » Keyswitches
Is the 653 key switch cylinders available with Primus?
Order the 653 key switch as 653-XX, then specify a Primus cylinder on a separate line item. Specify a mortise cylinder 1 1/4" length with a straight cam. ...
Schlage Commercial » System Components | Schlage Commercial » System Components » Keyswitches
Can the 650 series key switch be ordered with a F keyway?
No, you will have to order the key switch with no cylinder (that is standard) and then order the Mortise cylinder with the desired keyway separately. ...
Schlage Commercial » System Components » Keyswitches | Schlage Commercial » System Components » Keyswitches » 650 Series
Can the L2 option be added to an existing 653 Keyswitch?
Yes , order a P653064 Standard Plate - Stainless Steel - L2 and the LED lights come pre-installed on the plate. ...
Schlage Commercial » System Components | Schlage Commercial » System Components » Keyswitches | Schlage Commercial » System Components » Keyswitches » 650 Series