Category: 94/95 Series INPACT

(Results from 1 to 10)
Why is the output cam breaking on the 940L?
The most common cause is the position of the master cam on the 94/9547 or 94/9575 is not in the neutral position.     To change the position of the cam: Remove set screw...
Schlage Commercial » Exit Devices » Recessed | Schlage Commercial » Exit Devices » Recessed » 94/95 Series INPACT | Schlage Commercial » Exit Devices » Recessed » 94/95 Series INPACT » Von Duprin | Schlage Commercial » Von Duprin
Is the door prep the same for the old LP373L and today's 940L for 94/95 series device?
Yes, the prep is the same....
Schlage Commercial » Exit Devices » Recessed » 94/95 Series INPACT
EL Device Troubleshooting Guide
VISIT US.ALLEGION.COM/EL-SUPPORT FOR TROUBLESHOOTING VIDEO, DOWNLOADABLE GUIDE, AND INSTALLATION INSTRUCTIONS(For best viewing, use Chrome or Firefox browser.)ALLEGION EL SOLENOID ELECTRIC L...
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Recessed | Schlage Commercial » Exit Devices » Recessed » 2390 Series | Schlage Commercial » Exit Devices » Recessed » 94/95 Series INPACT | Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial » Exit Devices » Touch Bar » 1490 Series | Schlage Commercial » Exit Devices » Touch Bar » 1590 Series | Schlage Commercial » Exit Devices » Touch Bar » 1690 Series | Schlage Commercial » Exit Devices » Touch Bar » 1790 Series | Schlage Commercial » Exit Devices » Touch Bar » 24 Series | Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Falcon | Schlage Commercial » Von Duprin | Schlage Commercial
Is the 94/95 Series available in a black finish?
Yes, the 94/95 Series is available in a black finish as an engineering special.See the Von Duprin price book for the latest updates and information for ordering engineering specials....
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Recessed » 94/95 Series INPACT | Schlage Commercial » Von Duprin
Is there a QEL conversion kit for the Von Duprin Inpact 94 or 95 series exit device?
The QEL 94/95 Series Motor Conversion Kit (part number 958005) may be used to convert any mechanical 94/95 series device to QEL.  It may also be used to replace an existing 94/95 series QEL ...
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Recessed | Schlage Commercial » Exit Devices » Recessed » 94/95 Series INPACT
Is there an electric mortise lock for 9475L?
No, there is no electric locking and unlocking mortise lock for use with the INPACT 94/95 series exit devices.  Electric locking and unlocking lever trim is available as an engineering specials i...
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Recessed | Schlage Commercial » Exit Devices » Recessed » 94/95 Series INPACT
Can the 283 strike be used with a metal frame with concealed vertical rod devices?
No, per the UL Compliance group, the concealed rod devices are only tested with the 338 strike with metal frames. This applies to panic and fire applications.  The 283 strike may only be used wit...
Schlage Commercial » Exit Devices » Recessed » 94/95 Series INPACT | Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series
What is the part number for screws that connect the baseplate and the push pad of the 94/95 Series?
These screws are available only through Falcon.  The part number is SCREW.1136....
Schlage Commercial » Exit Devices » Recessed | Schlage Commercial » Exit Devices » Recessed » 94/95 Series INPACT | Schlage Commercial » Exit Devices » Recessed » 94/95 Series INPACT » Von Duprin
Can I retrofit an EL94 or EL95 device with QEL?
Due to differences between EL and QEL baseplates, existing EL94 or EL95 devices cannot be retrofitted with QEL.  A new QEL94 or QEL95 device must be ordered instead. ...
Schlage Commercial » Exit Devices » Recessed » 94/95 Series INPACT | Schlage Commercial » Exit Devices » Recessed » 94/95 Series INPACT » Von Duprin | Schlage Commercial » Von Duprin
What Schlage cylinders and cams are used with Von Duprin exit devices?
Each document below identifes:  Schlage cylinder type Schlage cylinder part # Schlage cam type  for the exit device & trim series listed.   Click ...
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Cross Bar » 55 Series | Schlage Commercial » Exit Devices » Cross Bar » 88 Series | Schlage Commercial » Exit Devices » Recessed » 94/95 Series INPACT | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series