Ask your question
User questions
- Are thermal break frames available?
- Does Steelcraft offer a Kerf Frame feature?
- What are the different door cores available?
- What is a U-Factor?
- What are the thermal factors for Steelcraft door products?
- What is thermal bow?
- Why would an EL 98/99 solenoid get hot?
- Should a solenoid be hot to the touch?
- Does Steelcraft offer a KD (knocked down) assembly for sidelight frames?
- Will Von Duprin supply the 996L, 996L-BE, 996L-NL and 996L-DT trims with an RX switch?
- ELECTRIC LATCH RETRACTION
- EL Device Troubleshooting Guide
- What power supply is needed for EL devices?
- Is there an EL conversion kit for the Falcon 2390 exit device?
- How do I wire an EL device to normally hold open the latch and release it during a fire alarm?
- How do you test a Falcon 24 or 25 Series EL solenoid?
- Can the Von Duprin EL option be added to any existing 98/99 device?
- How does the latch bolt retract on the Von Duprin XP device?
- Does Schlage offer a plastic Full Size Construction Core?
- What Schlage construction core will work in a C987?
- How do you order the ND series lock with a small format core?
- Do Schlage cylinders meet BHMA A156.30 Grade 1?
- Will Schlage make a cylinder in another vendors keyway?
- Does the Schlage SFIC rim housings accept both 6 and 7 pin IC cores?
- Can a Pin & Barrel Continuous Hinge be cut to size in the field?
- What is maximum width, height and weight for IVES butt hinges?
- What hinges can be used on tornado doors?
- Where is common cutout for Von Duprin EPT prep in Ives 224 Continuous Hinge?
- Why is my TWP narrower than my XY hinge?
- Is the material thickness of the 112HD thinner than the 224HD?
- MA lock case dimensions.
- Will a Schlage L9000 thumbturn work on a Falcon MA lock?
- Does Falcon have a breakaway lever trim feature on mortise locks?
- MA launch information
- Is 630 Stainless Steel finish available on the latitude lever for Falcon MA series mortise locks?
- Is there an ADA thumbturn offered in the MA locks?
- What non IC cam is offered by Schlage to work in a Falcon MA lock?
- Are the Von Duprin 6000 series electric strikes rated for continuous duty?
- Isonas RC03 with Intermittent Connection / Drop
- What would cause a 4600 Series operator to open up and intermittently stick open?
- How hot do the 6000 electric strikes get?
- Can doors be prepared for raceways in the factory?
- EL Device Troubleshooting Guide
- What is needed to keep the EL device retracted all day?
- Is there a conversion kit to make 94/95 devices into a QEL?
- Can the Von Duprin exit alarm ALK and electric latch retraction QEL or EL device be in the same device?
- How is the QEL calibrated?
- What actuators can be used on the 8310-866 Bollard post?