Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ woodtech thermal break door ”

RELATED FAQS

Resolution: Additional information on Thermal Break Frames can be found on Tech Data Pages 224 thru 227 :

Resolution: Thermal Bow is a temporary condition which occurs in metal doors mainly due to the temperature differential from one side of the door to the other. This may occur in exterior doors when direct sun ...:

What are the thermal factors for Steelcraft door products?

Resolution: All doors are tested in accordance with ASTM C1363 and SDI 113:B18 Series (Steel Stiffeners) U-Factor = 0.50 R-Value = 2.01B16 Series (Steel Sti...:

Will the 4600 series operator be damaged if activated when the door is locked?

Resolution: Any good secure setup and installation should be getting an open signal that has already gone through credential access first (ex……card reader, keypad, Key switch) and ignoring a locked door. ...:

Why does my key cylinder spin and not lock or unlock the ND?

Resolution: This could also happen if the tailpiece isn't installed in a KIL, FSIC, or SFIC cylinder. The FSIC driver also could have come loose from the core in the spindle. :

How many door files should the Hand Held Device (HHD) be able to store at one time?

Resolution: For best Schlage Utility Software (SUS) and Hand Held Device (HHD) performance do not put more than 100 door files at a time ....:

What would cause a 4600 operator to click a few times when the actuator is pushed, but not open the door?

Resolution: If a 4600 clicks, but won't open the door: Verify proper connection of all the control box connectors. Verify correct manual operation of door. Verify actuator connections and any strike/maglo...: