Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ what temperature will closers work ”

Resolution: The LCN closer fluid "Liquid X" will perform without variation between: -30° F to +120° F - for manual closers. +35° F to +120° F - for electrical closers and a...:

What options are available to add frame reinforcement for surface closer?

Resolution: Steelcraft offers two optional types of reinforcements for open section header to be installed in distributor shop or in the field: Full profile sleeve; is a 14 gauge, 16" long part to fit the p...:

Can a 4010 be mounted with swing clear hinges?

Resolution: Locate closer and arm from the centerline of the swing clear hinge pin.:

Does Steelcraft offer a Kerf Frame feature?

Resolution: A Kerfed Frame is a frame that is formed with an optional integral pocket or recess in the area of the stop to receive gasket, seals or weather stripping.Kerfed frames are available as an ...:

At what degree will the AFL (Auxiliary Fire Latch) bolt release?

Resolution: 1400 degrees which is approximately 20 minutes after the fire starts.:

What is the maximum glass size available on the T-Series door?

Resolution: Glass lights are available in fire rated T-Series doors: Limited to one (1) light per door leaf with a maximum of 100 square inches of exposed glass. This applies to all hourly ratings a...:

What is a U-Factor?

Resolution: The U-Factor, R-Value and K-Thermal Rating are measurements of thermal transmission through building products. U-Factor: Overall co-efficient of heat transmission passage through a built-up panel...:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ what temperature will closers work ”

RELATED FAQS