Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ what lock can be used on an over sized door ”

RELATED FAQS

Resolution: The use of Panic Hardware and/or Fire Exit Hardware is required by the International Building Code (IBC) and NFPA 101 – The Life Safety Code, depending on which code and which edition of the code i...:

What are Hold Open Closers & Magnets?

Resolution: Hold Open Closers & Magnets (Fire/Life safety products) provide a wide range of solutions. Single or multi-point hold open closers Utilize an electromechanical closer. Hold the door o...:

What is the Multi Point LM9300 Series?

Resolution: MultiPoint locks are three-point locking systems that secure the door at three points – top, bottom, and traditional center latch location. Operating just like traditional locks, MultiPoint locks...:

Which electric strike do I use for cylindrical locks used in a single door?

Resolution: The 6211 would be the most common electric strike to be used with cylindrical locks on a single door application. Check the template to confirm compatibility with specific cylindrical lock model n...:

What is the most common practice for running electric power from a frame to the door and hardware?

Resolution: Electrical hinges or a power transfer units are the most commonly used practices to run electric power to locks and/or strikes. Electric Hinges: Most electric hinges will fit into...:

What wire gauge and run is recommended for Von Duprin electric latch retraction EL device?

Resolution: :