Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
what is nd series with td core
”
RELATED FAQS
Question
Answer
Is there a tool to drill the thru bolt holes on cylindrical locks?
Resolution:
Order the M204-198 thru-bolt jig, see Figure 1. Figure 1: M204-198 thru bolt jig The 40-080 was the old Schlage jig. The 030736-000-70 was the old Falcon jig. When the jig changed to...:
What is the part number for the full size core driver for the ND series?
Resolution:
The ND-Series FSIC driver is part number N523-127.:
How do you order the ND series lock with a small format core?
Resolution:
The letters GD, HD, BD, or BDC should be put after the lock function. EXAMPLE: ND53BD GD = Schlage SFIC core HD = Construction core BD = Less core BDC = Plastic temporary construction core:
What are the part numbers for the ND lock spring cages?
Resolution:
ND-series locks manufactured before January 30, 2017 used the following spring cages::
What parts are needed to convert JD to BD on an ND lock?
Resolution:
For ND Locks shipping prior to January 30, 2017:The springcage(s), lever, and core driver will need to be changed. Depending on the function the components below are required.Outside spring c...:
Does the backset extension link work with a 2 3/8" latch or a 2 3/4" latch?
Resolution:
A and AL product: Must use the 2 3/8" backset with the 41-005 extension link D Knob and ND product: Must use the 2 3/4" backset with the 43-005 extension link: