Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
what door levers are ada compliant
”
RELATED FAQS
Question
Answer
What is the minimum clear opening width required by ADA on a single door?
Resolution:
The minimum clear opening width for ADA is 32" measured from face of door opened to 90 degrees to face of stop on strike jamb. There must be no hardware mounted to the door projectin...:
What is the size of the Levon lever in the A series?
Resolution:
The door face to lever tip distance is 1 3/8":
Did Falcon ever make a lock for elevator doors?
Resolution:
Falcon manufactured an EZF101 which was a large plate with a recessed lever for use in elevators. This item is no longer available. :
What is the door-to-lever tip distance on the S Jupiter lever?
Resolution:
The lever return distance (tip of lever to door face) on the Jupiter lever design is approximately 1-3/4".:
What is the AL Jupiter lever return to the door?
Resolution:
1.20 inches:
What is the square block that holds the L lock levers onto the door?
Resolution:
The square block is probably the springcage assembly, L283-040. This component has an internal spring to keep the lever in the horizontal position.:
How do you order the L series lock with an ADA thumbturn?
Resolution:
Effective December 9, 2019, Schlage L Series mortise locks with a thumbturn will ship standard with our new ADA thumbturn. The new ADA thumbturn is slightly smaller than the existing design w...:
Are Ives pulls ADA compliant?
Resolution:
8103EZ and 9103EZ have 2 1/2" clearance the other pulls have 1-1/2" clearance. Check with your local code for clearance required.: