Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ wake on radio ”

Resolution: Setting Dynamic Channel Switching 1) Connect and couple the SUS to the PIM400 you intend to change. See the SUS User Guide for details 2) Under “PIM Properties” and the “Edit” tab is ...:

Can the AD-Series and CO-Series magnetic card credential readers be set to read data from different magnetic card tracks?

Resolution: Customers will need to use the Schlage Utility Software (SUS) on the HHD lock programming device to set the desired magnetic track to be read for access control, if not using default Track 2&n...:

What is the part number for the wireless communication module, radio board, COM400, with the remote antenna connection (gold jack)?

Resolution: The COM400 has only two versions of FW, 2.2a and 2,2d and they are cross compatible and completely functional with all AD-Series wireless devices. There is no reason to change a FW 2.2a to a FW 2...:

What are the TWO red SCHLAGE flashes on an AD400?

Resolution: ONE red flash, One red flash indicates RF COM loss, the AD400 radio did not get an answer from the PIM400-485 radio or the PIM400-TD2 radio. The PIM400-485 will turn off it's radio if th...:

How to adjust First, Delay, and Retry in a PIM400 & AD400?

Resolution: To change FIRST/DELAY/RETRY connect and couple the SUS/HHD to the AD400 and find under the EDIT tab the FIRST/DELAY/RETRY settings. See notes Or connect the SUS/HHD t...:

RADIO FREQUENCY

Resolution: RF, wireless activation:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ wake on radio ”

RELATED FAQS