von duprin standard bronze finish

RELATED FAQS

Question
Answer
Yes, with the exceptions that the 2090 base material is aluminum whereas the 1090 was either brass or bronze base material depending on the finish.
Von Duprin Exit Devices (33A/35A, 98/99, etc) are handled on a case by case basis regarding their ability to handle salt and chemical environments. Our powder coated finishes US28 (Anodized Alum...
Device: Pushbar end caps, pushbar trim and center case cover. Trim: Lever assembly, trim plate assembly (trim plate and bushing sleeve).Bronze Finish Comparison
Authentic oil rubbed bronze finish, or finish code 613 oil rubbed bronze will wear over time due to the “rubbed” finishing method which does not allow application of a protective coating or plating...
The current Powder Coat finishes are: Aluminum (BHMA 689) Dark Bronze (BHMA 695) Brass (BHMA 696) Light Bronze (BHMA 691) Statuary Bronze (BHMA 690) Black (BHMA 693)For list of standar...
Tan Powder Coat can be ordered but only available as a special finish with a metal cover.
White Powder Coat can be ordered as a special RAL finish with a metal cover.
The closest powder coat finish by LCN is Dark Bronze (BHMA 695).
The 643e is a powder coat finish equivalent to the US11 aged bronze finish.  The 613 is oxidized and oil rubbed and is equivalent to the US10B. 
Warranty Statement3 Year Limited Mechanical Warranty and 1-Year Limited Electromechanical Warranty - Additional warranties listed below The provisions of these limited warranties do not apply to P...