stk strike vs asa strike

RELATED FAQS

Question
Answer
Strike Prep, 4 7/8" ASA Door Strike Prep with lip and VRPD reinforcements; ANSI A115.2, Door Strike Prep
Strike Prep, 4 7/8" ASA Door Strike Prep with lip and RPD reinforcements; ANSI A115.2, Door Strike Prep
4 7/8" ASA Door Strike Prep with lip @ special location; ANSI A115.2, Door Strike Prep
Strike Prep, 4 7/8" ASA Door Strike Prep with lip @ 60" above bottom of frame; ANSI A115.2, Door Strike Prep
Hinge Spacing: All 4 1/2" and 5" butt hinge spacing 1. Opening heights 3'0" through 4'11 15/16" (one pair butt hinges) from under head CL 9 3/4" (top of door 9 5/8") from bottom of frame ...
Hinge Backset: On the frame = 5/16" On the door = 1/4"
Lock Spacing: All standard bored locks ANSI 115.2 (161, 61L type), for mortise lock ANSI 115.1 (86 type) all locations must be altered 3/8" lower, and standard strike (ASA type). 1. Opening ...
Strike Prep, 4 7/8" ASA Door Strike Prep with lip @ 48" above bottom of frame; ANSI A115.2, Door Strike Prep
This will work but requires a 579 shim kit from Falcon Monarch. See attached instruction sheet, 579 Shim Kit.