Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ stc rating L series doors ”

RELATED FAQS

Resolution: STC stands for Sound Transmission Class. An STC (Sound Transmission Class) is a single number rating system derived from measured values of sound transmission loss in accordance with ASTM E90...:

What is a Cam Lift Hinge?

Resolution: Cam Lift Hinges are specially designed hinges used mainly on acoustical door assemblies. The Cam Lift Hinge lifts the door during its travel and seats the door bottom for a pos...:

What Steelcraft products have been tested in accordance with SDI's Acoustical Testing Standard #SDI 114?

Resolution: SDI 114 is no longer published as an SDI performance standard. The new SDI standard for acoustical Performance is SDI 128-09Steelcraft does offer products that have been tested in accordance with S...:

What is the max rating available on an full glass (FG) door?

Resolution: A UL 20 minute fire rating is the maximum fire rating for a Full Glass (FG) door design. A14-Series door construction: Max fire rating is 20 minute. UL label only FG must use Over-Lapping Stee...:

What options are available on the CE-Series doors?

Resolution: CE Series door in a variety of embossed panel designs and gages. The CE series embossed panel doors also offer a wide range of specifiable options including sizes, and hardware prepar...:

Is the L-Series mortise lock UL rated?

Resolution: UL Listed for 3-hour fire door (except L9076 and L9077):

What is the part number for a L mortise lock spindle?

Resolution: The Schlage L-Series mortise lock spindle and spring part number can be found in the Table 1. Spindles and Springs Part Number Description L283-060 Spindle and spring, 1...:

What doors are available with monorail preps?

Resolution: Monorail cutouts are only available for non fire rated applications.:

Factory installed louvers?

Resolution: Stamped louvers are no longer available from Steelcraft in any door series. Steelcraft discontinued this offering in 2008. Steelcraft will only provide a cutout only in doors for louvers.:

What are the thermal factors for Steelcraft door products?

Resolution: All doors are tested in accordance with ASTM C1363 and SDI 113:B18 Series (Steel Stiffeners) U-Factor = 0.50 R-Value = 2.01B16 Series (Steel Sti...:

What are the maximum door width and height sizes?

Resolution: Maximum nominal (overall) single door sizes are as follows:L-Series (Laminated Door)20 Gage = 3’ 0” wide X 8’ 0” high18 Gage = 4’ 0” wide X 10’ 0” high16 Gage = 4’ 0” wide X 10’ 0” high1...:

What are the minimum stile and rail dimensions for the L-Series door FG, FG2 & FG3?

Resolution: The minimum stile and rail dimensions are to exposed glass are: Stiles = 6 13/16" Top Rails = 6 3/4" Center Rails = 7 1/2" Bottom Rail = 10 3/4" For high traffic and high abuse locations th...:

What core options are available in L-Series door?

Resolution: Door cores are available as follows: L-Series SL-Series and A14-Series Doors: Honeycomb core is standard Polystyrene core is optional Polyurethane core is optional CE-Serie...: