Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ spring cage L series ”

RELATED FAQS

Resolution: Levers may sag due to an incorrectly installed springcage or an incorrect springcage.Mortise locks with a fixed (rigid) lever such as an L9080 will use a spacer on the rigid lever (outside) and a s...:

What is the part number for the lever return spring for the MA lock?

Resolution: Lever assemblies part numbers are found in the Pricebook. Note they are handed.:

What is the part number for the springcage for an L9000 lock?

Resolution: The springcage part number is L283-040.:

Why can't I get my JD YA6 cylinder to install into an AD-Series lock?

Resolution: The JD YA6 tailpiece is intentionally designed such that the tailpiece cannot be installed at the same time as the cylinder. Interchangeable cylinders assume that the lever and taipiece is i...:

Why does the lever on my T lock lever droop?

Resolution: Issue: One or both levers don't stay horizontal and droop down. Facts: Falcon T series locks in a high use application. Cause: Weak or broken springs within t...:

What are the part numbers for the ND lock spring cages?

Resolution: ND-series locks manufactured before January 30, 2017 used the following spring cages::

What was the part number for the old D series levers spring cage?

Resolution: The old D series springcage part numbers are as follows: C303-035 - Inside Springcage C303-036 - Outside Springcage These parts are no longer available.:

Why can't a new spring cage or driver be installed on an older AL lock?

Resolution: In 2002 the Schlage AL-Series underwent a design change that affected the spring cage, driver, and plastic insert. Spring cage and driver replacements for AL locks manufactured before this design ...: