spindle plastic part

RELATED FAQS

Question
Answer
Part number for the 373L spindle is #967480-89
A lock specified by a cylinder suffix BDC will be supplied with a disposable small format construction core, see Figure 1 below.  There is no metal key but instead the BDC cylinder has a ...
A small format disposable core is used as a SFIC construction core that is for low security applications and can be thrown in the waste bin after use.
The Schlage L-Series mortise lock spindle and spring part number can be found in the Table 1.     Spindles and Springs   Part Number  Description  L283-060 Spindle and spring, 1...
The castlenut wrench material was changed from steel to a very strong polymer.  The new part number is 40-017.
Both the DW and K-Series frames are identical with the exception of the base anchoring. Both the DW and K-series frames are supplied with a field adjustable compression anchor in each jamb located ...
In 2002 the Schlage AL-Series underwent a design change that affected the spring cage, driver, and plastic insert.  Spring cage and driver replacements for AL locks manufactured before this design ...
Only the chassis components are modified for thicker door applications, the lever and spindle assemblies remain intact.  The following parts may be modified depending on the function of the lock ...
All spindles are on a "square" at 0.312" (5/16")
The LV9000 levers will rotate as normal when locked.  Once the lever is rotated to about 45 degrees the lever hits a stop.  At that point if the lever is forcefully rotated past the stop the LV spi...