Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ spacer vs. spring cage ”

RELATED FAQS

Resolution: Levers may sag due to an incorrectly installed springcage or an incorrect springcage.Mortise locks with a fixed (rigid) lever such as an L9080 will use a spacer on the rigid lever (outside) and a s...:

Why doesn't the AD-Series-Exit Device communicate with the Hand Held Device after rehanding the lockset?

Resolution: During the rehanding of an AD-Series Exit (993) device or the rehanding of a CO-Series Exit (993) device it is possible for the customer to damage the 5-inch pcba by using the wrong screws. D...:

What are the new announced ND-Series features?

Resolution: NOTE: ND locks manufactured on or after January 30, 2017 will no longer make use of the soft durometer spacer. The improved spring cage and matching lever eliminates the need for this spacer. ...:

What is the part number for the lever return spring for the MA lock?

Resolution: Lever assemblies part numbers are found in the Pricebook. Note they are handed.:

What is the part number for the springcage for an L9000 lock?

Resolution: The springcage part number is L283-040.:

Why can't I get my JD YA6 cylinder to install into an AD-Series lock?

Resolution: The JD YA6 tailpiece is intentionally designed such that the tailpiece cannot be installed at the same time as the cylinder. Interchangeable cylinders assume that the lever and taipiece is i...:

Why can't a new spring cage or driver be installed on an older AL lock?

Resolution: In 2002 the Schlage AL-Series underwent a design change that affected the spring cage, driver, and plastic insert. Spring cage and driver replacements for AL locks manufactured before this design ...:

Why does the lever on my T lock lever droop?

Resolution: Issue: One or both levers don't stay horizontal and droop down. Facts: Falcon T series locks in a high use application. Cause: Weak or broken springs within t...:

What are the part numbers for the ND lock spring cages?

Resolution: ND-series locks manufactured before January 30, 2017 used the following spring cages::