Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ senior swing (std) arm installation ”

Resolution: When installing the arm; the gearbox shaft and door must be at the (+90°) full open position. The following step are used to install the Senior Swing (STD) pull arm. Install...:

How do you install the LCN 9540 Senior Swing (REG) push arm?

Resolution: When installing the arm; the gearbox shaft and door must be at the (+90°) full open position. The following step are used to install the Sr. Swing (REG) push arm. Install t...:

Is the 9500 Series Senior Swing handed?

Resolution: The Senior Swing "control box" is not handed. All Senior Swing motor "gearboxes" are handed, both the 2800 Series concealed and 9500 Series surface mounted operators. The 2800 Series "concealed a...:

What is the Senior Swing 9540 REG arm part number?

Resolution: The part number for the threaded rod "only" on the Senior Swing regular arm is 9540-82, 9550-82, or 9560-82 or -82L for the long rod option. The part number for the threaded rod, turn buckles, an...:

What is the minimum and maximum reveal for a 9500 Series Senior Swing operator?

Resolution: The 9542, 9553, 9563 surface mounted Senior Swing with a regular arm, mounted on the push side of the door, can handle a reveal from 1 1/8" up to 10". The 9542, 9553, 9563 surface mounted Senior S...:

How do you install a Senior Swing 9540 on one leaf of a double door?

Resolution: Surface Mounting - A 9542 HDR2 (Double Door Header) and a 9540-18 mounting plate can be used on the active leaf. A manual closer with a PA (parallel arm) can then be installed on the inactive leaf....:

SINGLE LEVER (STANDARD) ARM (STD

Resolution: track arm, std arm:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ senior swing (std) arm installation ”

RELATED FAQS