Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ schlage utility software installer update ”

Resolution: Updating the Schlage Utility Software (SUS) on a Hand Held Device (HHD) will cause the SUS "Login Password" AND the current device "Coupling Password" to be reset to factory default settings of - 1...:

Can the low coin cell Nuisance delay be Disabled on a CO200?

Resolution: The coin cell is ignored when the lock sets are used with Manual Programming ONLY or while in Construction mode.:

The Hand Held Device (HHD) or Schlage Utility Software (SUS) will not connect to the CO200?

Resolution: Make sure the HHD/SUS is set to USB communication by checking the small icon right of the "No Device Connected" message. The symbol should be a USB symbol when working with USB enable product...:

Which AD firmware package version supports WRI400/CT5000 devices?

Resolution: SUS 4.4.0 released on 06/06/2011 is the first released SUS version compatible with WRI400 and CT5000 devices.:

Is there a way to clone a failed PIM400 so it could be replaced without having to re-link associated locks?

Resolution: It is currently not possible to clone an AD-Series PIM400.:

Does SUS (Schlage Utility Software) run on the HP IPAQ PDA?

Resolution: The SUS (Schlage Utility Software) will not run or work on the older HP IPAQ PDAs. The older HP IPAQ PDAs run CEUplink to interface and program legacy locks. The SUS (Schlage Utility Software) will...:

How do I program Locknetics CM / CL legacy locks with the Schlage Utility Software (SUS) and Hand Held Device (HHD)?

Resolution: - With the CIP NOT inserted and the Schlage Utility Software (SUS) running o Enter the Master Programming PIN or Present Loc...:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ schlage utility software installer update ”

RELATED FAQS