Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
schlage utility software download for hdd
”
RELATED FAQS
Question
Answer
Where can I download the latest version for the Schlage Utility Software?
Resolution:
Updating the Schlage Utility Software (SUS) on a Hand Held Device (HHD) will cause the SUS "Login Password" AND the current device "Coupling Password" to be reset to factory default settings of - 1...:
The Hand Held Device (HHD) or Schlage Utility Software (SUS) will not connect to the CO200?
Resolution:
Make sure the HHD/SUS is set to USB communication by checking the small icon right of the "No Device Connected" message. The symbol should be a USB symbol when working with USB enable product...:
Can the low coin cell Nuisance delay be Disabled on a CO200?
Resolution:
The coin cell is ignored when the lock sets are used with Manual Programming ONLY or while in Construction mode.:
Which AD firmware package version supports WRI400/CT5000 devices?
Resolution:
SUS 4.4.0 released on 06/06/2011 is the first released SUS version compatible with WRI400 and CT5000 devices.:
Is there a way to clone a failed PIM400 so it could be replaced without having to re-link associated locks?
Resolution:
It is currently not possible to clone an AD-Series PIM400.:
Does SUS (Schlage Utility Software) run on the HP IPAQ PDA?
Resolution:
The SUS (Schlage Utility Software) will not run or work on the older HP IPAQ PDAs. The older HP IPAQ PDAs run CEUplink to interface and program legacy locks. The SUS (Schlage Utility Software) will...: