Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ sales rep PA ”

RELATED FAQS

Resolution: Please refer to the Allegion Contact Us web page for all inquiries in North and South America. Contact Us for Europe, Middle East, India, Africa and Asia Pacific, ...:

Where are Allegion Wiring and Riser Diagrams (Von Duprin, Schlage, LCN) ?

Resolution: Wiring and Riser diagrams can be accessed at: Common wiring diagrams can be accessed at: us.allegion.com Go to "Document Library" > then choose Document type of "Wiring ...:

Do you have a micro-switch with orange wires?

Resolution: The micro-switch with two orange wires is probably the Chexit switch assembly for devices shipped prior to 8-24-2015 with solenoid driven, part number 13-065-00. :

How to test the RX switch in a Chexit device.

Resolution: Chexit devices shipped prior to 8-24-2015 with solenoid driven: If Chexit device goes into alarm with fast flashing red LED after the rearm time, the RX switch may be out of adjustment or defect...:

What should I do when my F-Series HandPunch is indicating "Memory Full"?

Resolution: The F-Series HandPunch will display "Memory Full" when the number of transactions being stored on the hand reader exceed its memory capacity. When the memory capacity is exceeded, the hand reader...:

What special template (ST) is used with a 4040(XP) Rw/PA mount closer and a GJ overhead stop?

Resolution: The use of a 62A Shoe (required) would be used to mount a 4040XP Parallel Arm with a "SURFACE" GJ 70, 79, 81, 90, or 450 series stop. You would order the 4040XP with a Reg w/62A arm op...:

Where is the RA closer reinforcement located on a frame for a Regular Arm Closer?

Resolution: Optional closer reinforcements are located at 3" from hinge jamb to the beginning of the reinforcement plate. This applies to Regular Arm, Parallel Arm, Top Jamb. Regular Arm (RA) closer reinfor...: