Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ reveal between frame and drywall ”

RELATED FAQS

Resolution: Drywall Slip-on Frame is an industry term describing a 3 sided frame designed to be installed on a wall composed of steel or wood studs with gypsum board or other facing material and is i...:

Can out of plumb (twisted) frames be adjusted?

Resolution: Out of plumb (also referred to as twisted) frames usually cannot be adjusted."Out of Plumb or Twisted frames (or jambs)" is a condition created by improper wall construction and/or improper in...:

Can "toed in" or "toed out" jambs be adjusted?

Resolution: This condition (toed in or toed out jambs) is usually not found until the door is installed.Frames which have toed in or toed out jambs have been installed out of tolerance.It is the responsibility...:

Can out of square frames be adjusted?

Resolution: It is the responsibility of the installing contractor to install all material in accordance with SDI or HMMA installation standards and tolerances. Out of square frames which are installed out...:

Does Steelcraft have frame installation instructions?

Resolution: It is always recommended to point installers to the industry installation manuals which are very comprehensive and are ANSI documentsClick here to get the updated link to the Steelcraft Shop M...:

What is the difference between the DW-Series and K-Series frames?

Resolution: Both the DW and K-Series frames are identical with the exception of the base anchoring. Both the DW and K-series frames are supplied with a field adjustable compression anchor in each jamb locate...:

Can Drywall Slip-on frames be welded?

Resolution: Drywall Slip-on frames are recommended and designed to be installed as KD (Knock Down) assemblies and not recommended to be welded (SUA). If a DW-Series or K-Series is welded prior to installa...:

What is a Drywall Throat Filler?

Resolution: Drywall Throat Fillers are used when wall thickness is between 1/8” (3mm) to 1/4” (6mm) less than the frame throat dimension, throat filler section(s) can be used to fill the gap, assuring the prop...:

F-SERIES

Resolution: F16, F14, F12, F Series; Masonry Frame, Drywall Frame, Conventional Frame: