Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ reinstalling AL series lock handle ”

RELATED FAQS

Resolution: The AL series product line does not use any parts that requires prior knowledge of the door handing. :

How to remove a double cylinder deadbolt?

Resolution: Schlage and Falcon double cylinder deadbolts have concealed screws to prevent tampering. The two methods used to conceal the thru-bolts are using screw caps or a faceplate. Use the below instructio...:

Reinstalling an AD-993 Tailpiece Holder Assembly

Resolution: Below is the link to the document that shows how to install the AD993 tail piece assembly: Reinstalling an AD-993 Tailpiece Holder Assembly:

What backsets are available on Schlage and Falcon locks?

Resolution: SCHLAGE locks are available with the following backsets: Lock Series Lock Type ...:

Is there a tool to drill the thru bolt holes on cylindrical locks?

Resolution: Order the M204-198 thru-bolt jig, see Figure 1. Figure 1: M204-198 thru bolt jig The 40-080 was the old Schlage jig. The 030736-000-70 was the old Falcon jig. When the jig changed to...:

Are ND locks available in 629 or 630 finishes?

Resolution: The AL and ND locks are not available in any stainless steel finishes. The only option is either the 626 satin chrome or 625 bright chrome.: