Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ qel and lcn operator ”

Resolution: Use the PS902-2RS power supply with LCN auto operator on single door, PS904-2RS power supply on double door and PS904/906-2RS-2RS for 2 pair of QELA is required for basic operation with a...:

Do all Senior Swing operators come with the Push-N-Go feature?

Resolution: All Senior Swing models are heavy duty operators and have the Push-N-Go (PNG) feature. This feature is a programmable function in the control module. The PNG settings are:&nb...:

How do I get service on my Astro Swing operator that isn't working properly?

Resolution: LCN does not does not have or supply any information for the old (obsolete) "High Energy" Dor-O-Matic Sliding doors, Bi-Fold doors or Astro Swing doors. You MUST be AAADM certified to work on, or g...:

Does the 4600 series operator have a Push N Go feature?

Resolution: The 4600 Series operator does not have a Push N Go feature. The LCN operators with a Push N Go feature are the Senior Swing, Benchmark, and the Falcon 8200 series.:

Where are hardware templates?

Resolution: All the templates can be found at us.allegion.com Please click here :

Can you operate a Doromatic EL 1490 with an LCN power supply?

Resolution: This is not possible. Due to the device's 16 Amp in-rush it would require it's own PS914-2RS which will power 1 or 2 devices.:

How are actuators wired to a 7900 or 7980 series control box?

Resolution: The "common" of all the actuator switches will connect to terminal 10. The N.O. (normally open contact) will connect to Terminal 5, 6, 7 or 8 depending on which control box is used and the function...:

Does LCN have a closer or operator for sliding doors?

Resolution: LCN does not offer any products for sliding doors.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ qel and lcn operator ”

RELATED FAQS