Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
PART NUMBER FOR LARGE FORMAT INTERCHAENGABLE CORE TAIL PIECE
”
RELATED FAQS
Question
Answer
What is the part number for T lock tailpiece used with a conventional cylinder?
Resolution:
Refer to Table 1 for a list of T lock tailpieces for conventional cylinders. Table 2 shows IC tailpieces. Table 1: T lock conventional tailpieces Table 2: T lock IC tailpieces:
What is the part number for the SFIC tail piece for a W lock?
Resolution:
Q330-168 SFIC Tailpiece (throw member for levers) Q330-169 SFIC Tailpiece (throw member for knobs) :
What is the part number for the full size core driver for the ND series?
Resolution:
The ND-Series FSIC driver is part number N523-127.:
What is the part number for a FSIC?
Resolution:
DESCRIPTION PART NUMBER Conventional Core 23-030 Conventional Core less logo 23-031 Primus Core 20-740 Primus XP Core 20-740-XP Primus Core less logo 20-741 ...:
What is the part number for a full size interchangeable core control key?
Resolution:
Classic Conventional Key Blanks and Cut Keys Part Number Description Key Blanks 35-056 Control Standard bow, embossed both sides 35-076 Standard bow, unembossed both s...:
What is the part number for a control pin for a 23-030?
Resolution:
There are two parts that can be referred to as control pins for a 23-030 (FSIC core).C603-967 is the lower control pin that sits in the seventh hole of the FSIC plug. (part B in exploded view) ...:
What is the size of the current Von Duprin dogging key?
Resolution:
All Von Duprin exit devices (22, 33/35A ,55 ,88 ,95 and 98/99) use 5/32" dogging key. There are two part numbers available: 090005 is the package of 2 and 090085 is the package of 10.: