Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
ordering configuration cards for legacy readers
”
RELATED FAQS
Question
Answer
Can I communicate via RS-232 to a Hand Reader if they have an EN-200 ethernet or MD-500 modem installed?
Resolution:
If a hand reader has an ethernet or modem card installed, the RS-232 port will be automatically configured as a printer output and RS-232 option removed from the SET SERIAL menu. In order to ...:
What are the model numbers for the new Schlage and XceedID wall mounted credential readers?
Resolution:
The Legacy wall mounted readers are replaced as shown in the table below: The MTMS15 and MTMSK15 did not have any prior models that it replaced.:
How do you create a custom Mifare configuration with DX2400 Xceed cards and the HandNet Lite software?
Resolution:
Here are the steps needed to create their custom Mifare configuration using DX2400 Xceed cards and the HandNet Lite software. Handnet Lite version 2.3.1.9 which is available on our FTP site, is req...:
Will the door unlock if a Von Duprin CX 98 / 99 Chexit device is deactivated with card reader and has a 996LBE trim?
Resolution:
When a CX99L-BE is not armed the exterior 996L BE lever trim will be free to retract the CX latch for entrance. When the CX99-L BE is armed the exterior 996L BE lever will not move and...:
Can the AD-Series and CO-Series magnetic card credential readers be set to read data from different magnetic card tracks?
Resolution:
Customers will need to use the Schlage Utility Software (SUS) on the HHD lock programming device to set the desired magnetic track to be read for access control, if not using default Track 2&n...:
What Proximity technologies do XceedID readers support?
Resolution:
ISOX card technology is no longer supported - contact XceedID sales: