Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ nd conversion kits ”

Resolution: The RX switch can be installed at the factory when device is ordered or in the field with part# 650359-00. Installation instructions here will show how the RX swi...:

What is the part number for the 99L to 99L-2 kit?

Resolution: Format for ordering double cylinder (-2) and double cylinder with security indicator (-2si)(device) (fire rated)(-2 or -2si)(conversion kit)(finish)(handing) Examples:98/9927-F-2-Conversion Ki...:

Is there a conversion kit to electrify the LP373L lever control?

Resolution: There is not a conversion kit to electrify the LP373L lever control. You need to order a complete E-LP373L-BE control through Engineering Specials.:

Is there a Von Duprin conversion kit to change mechanical to electric latch retraction EL in the field?

Resolution: Followings are the list of the electric latch retraction EL/HDEL (hex dogging), QEL (quiet) kits: 114317-00 QELA Mod. Conv. Kit 040061-00 QELA Mod. Conv. Kit...:

Can you cut the EL conversion kit - 3' base plate to fit a 30" 9947 device?

Resolution: You need to order the EL98/9947 or 3' EL conversion kit. This will fit on 28 1/8" minimum door opening on two vertical x vertical rod device doors.:

Is there an EL conversion kit for the Falcon 2390 exit device?

Resolution: There is no EL conversion kit for a 2390, the device will need to be replaced.:

Can the EL or QEL conversion kit be used on the old Von Duprin 33/35 exit device?

Resolution: Current EL and QEL baseplate conversion kits can be used on all latching types of the 33/35 series (non "A" version which were manufactured prior to 2003). At one time, the obsolete black EL ...:

Is there a Von Duprin delay egress Chexit conversion kit?

Resolution: There is no conversion kit for Von Duprin Chexit device. If delayed egress Chexit device is required, the entire device must be replaced.:

Does Schlage offer ND conversion kits to convert to Classroom Security function?

Resolution: For all available ND Series Conversion Kit part numbers, click here.:

What is the part number for hex dogging conversion kit for a 99 device?

Resolution: The part number for hex dogging conversion kit for 99 devices is 050114.:

What is the part number for the HD EL conversion kit for Von Duprin devices?

Resolution: HD-EL conversion kit for 3 feet exit device is 050384-00 and for 4 feet is 050385-00.:

What is the part number for QEL94/95 inpact conversion kit?

Resolution: The part will be configured as CONVERT.XXXX part numbers. The customer need to specify the following criteria. Required: Series 94 or 95, Fire or Panic , 3 feet/4feet or 2 feet 6 inches/2 feet...:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ nd conversion kits ”

RELATED FAQS